Automatic Line Select - Xblue Networks Xplus100 User Manual

Automatic Line Select
Feature Code: Feature
95
Feature Code: Analog
#*95
Description
Automatic Line Select allows you to select how your extension will act when the speaker button is
pressed, or the handset is removed. There are three selections, specific CO Line, CO Line Group or
the default ICM.
Default Settings:
Automatic Line Selection is set to "ICM" (Intercom)
Operation
1. Press the feature button followed by 95 and the display will read:
2. Select icm and the extension accepts the input and returns to idle.
3. Select trk and the display updates:
4. Enter a valid Trunk number 700 - 719, 744 -747, the press
SELECTION :ICM
icm trk route
TRUNK DIR #:
back save chg
XBLUE Networks
Telephone Operation
save .
17