Single Line Telephone - Co Line Flash - Xblue Networks 45p Installation & Maintenance Manual

Related Features
N/A
Conditions
If the analog device/SLT does not have a Hook-Flash operation button, operation of the
1.
hook-switch must fall within the time periods "Start" and "End" in order to be processed
as a valid hook-flash operation.
Hook-switch operations that are shorter than the "Start" time are ignored.
2.
Hook-switch operations that are longer than the "End" time are considered to be On-
3.
Hook hang up commands.
Single Line Telephone ‐ CO Line Flash
The Single Line Telephone - CO Line Flash command is necessary for a single line device to
send a Flash command to the connected CO Line. Applications for this operation include
PBX circuits and Centrex.
Related Features
Flash – CO Line
Single Line Telephone – Flash
Conditions
The successful operation of features for the host PBX is dependant upon proper opera-
1.
tion of host system features. Refer to the information provided with the host equipment
for more information.
Programming
Call Handling - SLT Hook Flash 3-16
Programming
Call Handling
CO Flash Time 3-05
SLT Flash Time 3-13
PBX Flash Time 3-04
XBLUE Networks
Telephone Operation
93