Xblue Networks X-50 Installation Manual page 190

Voice
The X-50 has 4 UCD groups, each can be programmed as an All Ring (rings all extensions
•
within the group), Linear (if a busy extension is found it will hunt to another group, but will not
continue to hunt if the extension rings), or Distributed (rings the extension that is on-hook and
idle the longest.
No Answer Time - The no answer time becomes active when a group is defined as Linear or
•
Distributive. The timer is adjustable between 10 and 120 seconds. This timer is not active when
set to "All Ring".
Timer Enable - The No Answer Timer (when set to either Linear or Distributive) the timer can be
•
enabled or disabled.
Reroute Time - At the expiration of the Reroute Time the call will be routed to the reroute
•
destination. The timer is adjustable from 10 to 120 seconds.
Reroute Destination - Calls can be rerouted to the main auto attendant, or to Voicemail.
•
UCD Group Name - Each UCD group can be labeled with a different name.
•
192
XBLUE Networks