5.2 WAN Configuration
There are three modes that you can configure the WAN IP address: Static IP mode,
DHCP mode, and PPPoE mode.
•
Static IP
◼
The static IP is the address for data transition. Need set the static IP address,
subnet mask, Default Gateway, and DNS.
•
DHCP
◼ The Dynamic Host Configuration Protocol (DHCP) is an Internet protocol for
automating the configuration of computers that use TCP/IP. DHCP can be
used to automatically assign IP addresses and deliver TCP/IP stack
configuration parameters such as the subnet mask and default router, and to
provide other configuration information.
•
PPPoE
◼ The Point-to-Point Protocol over Ethernet (PPPoE) requires a username and
password that your ISP has provided to you to establish your connection.
X16plus Administration Manual
5.1 Set Password
Page 37 of 54
Rev. 1.1.4