Function Of Keys Sk1 To Sk5; Using Keys Sk1 To Sk5 - Alcatel-Lucent 4035 User Manual

Chapter
1
- Customize the attendant set.
- Modify system management.
- Save (and use) the set individual phone book.
1.5.2

Function of keys SK1 to SK5

Depending upon the country, features may appear on different keys.
Key
SK1
SK2
SK3
SK4
SK5
1.5.3

Using keys SK1 to SK5

1.5.3.1 Function key SK1
With the Reseiz label displayed
-
This label is displayed during an outgoing call to a destination outside the system, upon
transmission of the first digit of the external number.
This function is used to renew the dialing on the same line: the system automatically
releases the line seize and the line reseizes it, providing a dial tone again and allowing the
redialing.
With the EndCCI label displayed
-
This function is used to release the consultation call that is being set up and return to
conversation mode with the first party (user or caller).
1.5.3.2 Function key SK2
With the Call label displayed
-
Following an ordinary call or a consultation call to an internal user, this function is used to
activate ringing on the set to which the call has been connected.
If the set is free, its number is shown on the display preceded by Free.
1-8
Label
EndCCI Used to cancel consultation call.
Reseiz Call again (using the same trunk).
Ring Call (i.e. ring a station).
Broker Broker call.
BargIn Used to barge in (intrude into a call conversation).
BargIn
Used to cancel barge-in.
Transf Transfer
CampOn Retrieve from routing.
OnHold Hold.
Endial End external dialing.
Overid Call the called user's forwarding destination.
Intern To answer a group call (call to the attendant group).
Releas Call release.
Next To answer the next call.
Function