Call By Speed Dialing; Call To An Internal User - Alcatel-Lucent 4035 User Manual

Chapter
2
Modify
Cancel
The attendant selects the called user by initials
When the first letter of the initials is entered ("B", for example), the following functions are
displayed:
After entering the rest of the called user's initials, the attendant confirms this choice by pressing
the Init. key.
The system searches through the name table and displays the first name in the list that matches
the initials entered:
The procedure is then the same as the procedure for "Dial by name" via selection of user name
(see above).
2.2.5

Call by speed dialing

The attendant accesses speed dialing by:
- The direct call prefix.
- The access prefix followed by the row of the speed dialing number.
- Pressing a key programmed with a speed dialing number.
Speed dialing is most often used for external dialing only. Dialing (numbering) is complete
when the dialed number has been analyzed by the system, and the procedure is then the
same for an ordinary call.
2.3

Call to an internal user

2-6
To return to the previous screen and modify the search string.
To return to the idle position.