Configuring The Programmable Keys For An Account; Defining The Default Sip Account - Alcatel-Lucent ALE M8 DeskPhone User Manual

3.2 Multiple SIP Accounts
The M8 DeskPhone supports 20 SIP accounts. A default account will be used for calls unless you select the
relevant account prior the call. It is recommended to program a key for each SIP account and put the key on the
homepage. Then the status of the account will be displayed on the homepage. The key of the SIP account used to
receive calls will flash. You can quickly answer the call to a certain account by pressing the programmable key. The
descriptions of different account icons are as follows:

3.2.1 Configuring the programmable keys for an account

Switch or
or Save

3.2.2 Defining the default SIP Account

The phone is in idle state.
Menu
Features
Default Account
Switch or
or Save
3.3 Making a call
This section describes how to make a call. We provide different methods to open the dialer before calling your
contact.
ALE M8 DeskPhone User Manual_Version 1.1 (July 2022)
If you configure an account key on the homepage, press it to select the
corresponding account for making a call.
The default SIP account is marked by a green point.
Call forward is activated for this account.
DND is activated for this account.
The registration for this account failed.
Long press on a programmable key.
Select the type of the programmable key:
Select the relevant account.
Add a label.
Save the configuration for this programmable key.
Press the Menu key to enter the Main Menu.
Use up-down navigation keys and OK key to select
Use up-down navigation keys and OK key to select
Save an account as the default account.
Validate your choice.
Complete the settings.
Account.
Features.
Default Account.
18/70