Text Messages - Alcatel-Lucent 4035 User Manual

3.1.4.2 Single line set/multiline set (with no free resource)
When dialing is complete, the screen displays (example):
The Status field indicates whether the set is internally (BsyInt) or externally (BusyEx) busy.
EndCCI
BargIn
Transf
CallBk
Releas
When the
The routing procedure after the timer is the same as described for routing on a free set.
3.2

Text messages

This function allows the attendant to leave a text message for the user; this may be:
- A message preprogrammed by the system administrator.
- A partial message to be completed by the attendant.
- A message to be entirely created by the attendant.
The flashing message LED informs the recipient that a message has arrived. At this point, the
attendant set is not notified that this message has been read by the user.
Pressing the Text key in the selection screen displays the following screen:
To cancel the consultation call and return to conversation with the first
user.
To barge in (intrude) on the conversation.
To transfer the current call (transfer on selection). The attendant remains
in routing supervision and the CampOn function is active.
To store a call-back request.
To release the current call and return to the idle position.
key is pressed, the Text, Display, and Entity labels appear.
Figure 3.13: Outgoing message screen
3-5