Transmission Of A Calibrated Cut-Off (Flash) - Alcatel-Lucent 4035 User Manual

Chapter
4
The attendant presses the
Pressing the Pulse key displays: DTMF and exits from the Service feature.
The attendant dials the additional digits to be sent. These digits are displayed on the right of
the screen. If the number dialled is greater than 10 digits, each subsequent digit is displayed in
th
the 10 position.
Pressing the SERVICE fixed key followed by the Pulse key exits the feature and displays the
following screen:
4.8

Transmission of a calibrated cut-off (flash)

Note:
This feature is not available on an ISDN trunk group.
This feature lets the attendant activate the following types of operations at the remote PBX
end:
- call-back by a register for acceptance of the dialing by a suffix,
- a service operation (remote attendant intervention).
The attendant makes an outgoing call:
- by prefix or access code,
- by speed dialing,
- by programmed key.
4-8
key to move onto the second screen: