Putting The Set Into Service (Status) - Alcatel-Lucent 4035 User Manual

Note:
The position of the labels on the attendant set display can differ slightly from system to system (described
in the following sections). Labels may or may not display, depending on attendant rights and the type of
set the called user has.
2.1

Putting the set into service (status)

On attendant set power-up, the set is in Night mode (inactive state). The status of the
attendant group to which the set belongs is displayed on the screen.
To put the set into operation, press the ON/OFF key (see the Alcatel 4035 attendant set -
Introduction to the 4035 attendant set - Preprogrammed and programmable keys).
Depending on system management, the set password may be requested before set status can
be changed.
The ON/OFF key activates the attendant set and switches it to the appropriate mode for the
attendant group. If it is the first attendant set to be brought into service, it initiates Day
service/mode for the entire group.
After pressing the ON/OFF fixed key, the screen displays:
When the Yes key is pressed, the attendant set changes to normal service (active).
Pressing the No key cancels the current operation and the attendant set returns to the inactive
state.
Note:
2-1