Motorola CPV5000 Installation And Reference Manual page 88

Installing Options
5
5-8
Note The flex cable going from the floppy drive to the CPV5000
has contacts on one side only. The shiny contacts go toward
the front panel at both ends, and the blue side goes toward the
backplane connectors.
3. If installing a floppy drive, attach one end of the cable to its connector
on the CPV5000. To attach the cable, push up on each end of the plastic
connector. The connector releases so that the cable can be inserted in the
connector. Insert the cable into the connector and push down on each
end. Attach the other end of the cable in step 7.
2170 9803