Slow clock ratio
This option specifies the speed at which the system clock runs in power saving
modes. The settings are expressed as a ratio between the normal clock speed
and the power down clock speed. The settings are 1:1, 1:2 (half as fast as
normal), 1:4 (the normal power down clock speed), 1:8, 1:16, 1:32, 1:64, or
1:128.
Display activity
This option specifies if AMIBIOS is to monitor activity on the display monitor
for power conservation purposes. When this option is set to Monitor and there
is no display activity for the length of time specified by the value in the Full-
On to Standby Timeout (Minute) option, the computer enters a power saving
state. The settings are Monitor or Ignore.
Enabling event monitoring
These options enable event monitoring. When the computer is in a power
saving mode, activity on the named interrupt request line is monitored by
AMIBIOS. When any activity occurs, the computer enters Full On mode.
Each of the following IRQ options can be set to Monitor or Ignore.
IRQ 3
IRQ 4
IRQ 5
IRQ 7
IRQ 9
IRQ 10
IRQ 11
IRQ 12
IRQ 13
IRQ 14
IRQ 15
WinBIOS Setup types
7-21
7