Resetting the Software to Default Settings
WARNING:
If you reset the software to default settings:
• You must go through the device setup (page 9), as if you've just purchased the device.
• Any changes you've made to the settings are lost.
Your 3G and 4G account information is not affected; after reset, the device remains
provisioned for service.
You'll need to reset the software to default settings if:
●
You've forgotten the administrator password.
●
You've changed the DHCP settings such that the device is inoperable (for example, there's no
communication with the device).
You have two options to initiate the reset:
●
Through the software. See "Resetting the Software to Default Settings (Through the Browser
Interface)" on page 116.
●
Through the reset button on the device. See the following section.
Resetting the Software to Default Settings (Through the Reset Button)
1.
Remove the battery compartment cover from the device.
114
Configuring the Router