Table of Contents
Advertisement
Terminals and Connectors
HDBaseT
IN
OUT
3G-SDI
■ HDBaseT
It can support Full HD uncompressed video transmit from image device compatible with
HDBaseT. Only supports video format over network cable. Data and sound are not sup-
ported.
■ RS-232
Connect a RS-232(Not supplied) from the computer to the terminal for controlling the
projector.
■ 12V TRIGGER Out 1 and 2
The TRIGGER terminal provides 12V (+/-1.5) output for screen control
■ R/C IN
Connect the wired remote control to this jack with a remote control cable (supplied).
■ Y/Pb/Pr
Standard and high definition (480i/480p/576i/576p/720p/1080i/1080p) component input,
connects to DVD/HD-DVD/BD player, HD set-top-box or other SD/HD input source.
■ SYNC IN / OUT
IN->From source equipment for informing which field of signal is the Left-eye or Right-
eye signal.
OUT->From projector and be connected to the 3D SYNC wireless transmitter for syn-
chronizing the projected picture with the 3D glasses.
■ LAN (10/100 BASE-T)
Connect the Ethernet cable to the terminals for controlling the projector.
■ 3G-SDI IN / OUT
Input SDI signals to IN and outputs the SDI signals from OUT.
■ HDMI IN
Connect the HDMI signal from the video device to this terminal.
■ VGA IN
Connect a computer output (Analog D-sub 15-pin type) to this terminal.
■ 5 BNC IN (G/Y, B/Pb, R/Pr, H and V)
Connect the VGA signals or Y/Pb/Pr signals.
■ DVI-D IN (Dual Link)
Connect the DVI-D output on the computer to the terminal, the terminal can support to
HDCP compatible signal.
Note:
Not supported PIP, Warp, and Edge Blend. Can be connected LAN only.
12V Trigger OUT
RS-232C
R/C IN
1
2
HDMI IN
VGA IN
G/Y
15
Y
Pb
Pr
B/Pb
R/Pr
H
V
SYNC
IN
OUT
LAN
DVI-D IN
Advertisement
Table of Contents
