Auto Image Adjust; Osd Operation-Picture; Contrast; Brightness - Eiki EIP-UJT100 Owner's Manual

Hide thumbs Also See for EIP-UJT100:

Table of Contents

Auto image Adjust

Set the timing of the Auto image Adjust function for(Resync on

modes:

■ Off: Auto image function is not executed.

■ Auto: Use the parameters that users used last time.

The adjusted parameters are stored in the projector, 5 resolution data for each digital

and analog inputs. If there is no record of parameters, auto image function will be

executed.

■ Always: Auto image function is executed automatically when the input source is

selected.

Use ◄ or ► to adjust the contrast of the projected image. Adjustable value: 0 to 200.

Note:

Brightness and Contrast controls are interactive. The screen change to one may require a subtle

change to the other in order to achieve the optimum setting.

Use ◄ or ►to adjust the level of black in the image to increase or decrease image

brightness. Adjustable value: 0 to 200.

Use ◄ or ► to adjust the adjustment of sharpness primarily changes the value of high

frequency detail. Adjustable value: 0 to 200.

page

41) below 3

Table of Contents