Table of Contents
Advertisement
Control Keys and LED Indicators
Control Keys
MENU
ON
ERROR
LED
STATUS
ENTER
STANDBY
■ STANDBY (LED-Blue)
The indicator that shows the projector's standby status.
■ ON (LED-Green)
Displays the projector's power status.
■ ERROR (LED-Red)
Displays the cause of problem (i.e. temperature, fan, lamp or system) that has led to
projector malfunction.
LED Indicators
Standby
Standby
Cooling / Warm up
ON
Power on / Normal
Time for lamps replacement
Lamp fail
Lamp door open
Fan Fail
ERROR
Over Temperature
System Errow
Remark:
The time period of each step in the above LED blinking pattern is 0.5 second, e.g., for "Cooling /
Warm up" state, the green LED will ON for 0.5 second, and then OFF 0.5 second, and then repeat the
above LED pattern
■
Turn on/off the projector (Press few seconds to
off the projector).
■ INPUT
Select the input source, press the button once to
select next source option, the sequence of the
source is HDBaseT, HDMI, DVI-D, VGA, Y/Pb/Pr,
5 BNC, 3G-SDI.
>
■ MENU
Press the button to open or close the OSD menu.
■ ARROW BUTTONS (
Use the four buttons to move the cursor on OSD,
select the item or adjust the setting
■ ENTER
Use the button to confirm the changes you made
and to show ZOOM/FOCUS OSD. When you
press the button again, LENS SHIFT OSD
INPUT
appears.
16
(POWER)
Light on - Blue
Light flash - Green
Light on - Green
Light flash - Green and Blue
Light flash - Red
Light flash twice - Red,
Light flash 3times - Red
Light flash 4times - Red
Light on - Red
)
Advertisement
Table of Contents
