Table of Contents
Advertisement
6. Insert the new lamp, tighten the three screws and make sure the lamp is firmly secured
to prevent the lamp from shaking or poor contact.
7. Install the lamp units and tighten the screws on them.
8. Reconnect power to the projector and reset the lamp usage timer. Refer to
Page 46 Lamp1 Run Time
Page 46 Lamp2 Run Time
ORDER REPLACEMENT Lamp
Replacement Lamp can be ordered through your dealer.
When ordering a lamp, give following information to the dealer.
Replacement lamp P/N: AH-D31010
59
Advertisement
Table of Contents
