Terminals - Eiki EK-120UK Owner's Manual

Terminals

① MONO(R/L)
For a mono audio signal (a single audio
jack), connect it to MONO(R/L) jack.
② AUDIO OUT
Connect external audio amplifier to this jack.
③ HDMI
This is the terminal to input the HDMI signals.
④ VGA IN
Connect a computer output to this terminal.
⑤ RS-232C
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
⑥ USB-B
This terminal is used to connect the
projector to the computer with a USB cable
when you want to use the "USB Display"
function.(Refer to Page 62-63).
⑦ USB-A
When using the "Memory Viewer" function,
insert the USB memory directly to this
terminal.(Refer to Page 60-61)
10
Part names and functions
① ② ③
⑧ ⑨
⑧ VIDEO IN
⑨ AUDIO IN
⑩ VGA OUT
⑪ Remote Control receiver(BACK)
⑫ Kensington Security Slot
⑬ LAN
- This is the LAN terminal to connect to the
- Connect the projector to the computer via
④ ⑤
⑩ ⑪
This is the terminal to input video signals.
This is the terminal to input computer audio
signals.
Output the analog signal form ② to other
monitor.
Operation the projector by remote control.
This slot is for a Kensington lock used to
deter theft of the projector.
* Kensington is a registered trademark of
ACCO Brands Corporation
network.
RJ45 cable when you use the "Network"
Display function.
⑥ ⑦
⑫ ⑬