■ Configuration
Use this page to modify the networking setting such as IP address, Subnet, Gateway
and DHCP. Make sure the IP address of the projector and PC are in the same network
group. For example, 192.168.0.X. Whereas X must contain a different value.
If the network provides DHCP service, you can enable DHCP client. IP Address, Subnet,
and Gateway will be assigned by DHCP service. Please contact with your network
administration for more details.
■ Diagnostics
Advance Diagnostics
This page is to diagnose the projector. Okay is displayed under normal condition. Error
code is displayed if there is an error in the projector. If any abnormal code, please
contact with the service center.
71