Positioning Projector; Picture Level And Pitch Adjustment; Adjusting The Picture Orientation - Eiki EIP-UJT100 Owner's Manual

Positioning Projector

Picture Level and Pitch Adjustment

The projection angle is adjustable up to 5 degrees upward and downward respectively
by rotating front and rear. To raise the projector, rotate the front feet clockwise, rotate the
rear feet clockwise to lower the projector.

Adjusting the Picture Orientation

This projector is designed to be installed in one of four possible installation locations.
Take into consideration the size and position of the screen, the location of a suitable pow-
er outlet, rest of equipment. Open the OSD -> ADVANCED -> Rear Projection or Ceiling
Mode to the preferred projection setting.
Front : Select this location with the projec-
tor placed in front of the screen. This is the
most common way to position the projector.
Ceiling + Front : Select this location with
the projector mounted on the ceiling in front
of the screen. Ceiling mount kit is required.
Please consult your dealer for more details.
Note:
Ceiling installation must be done by a qualified professional, It is not recommended you install the pro-
jector yourself. For more information, please contact your dealer.
Only use the projector on a solid, level surface. Serious injury and damage can occur if the projector
is dropped.
Do not cover the vents on the projector. Proper ventilation is required to dissipate heat. Damage to the
projector will occur if the vents are covered.
Rear : Select this location with the pro-
jector placed behind the screen. Note that
a special rear projection screen is required.
Ceiling + Rear : Select this location with
the projector mounted on the ceiling behind
the screen. Note that Ceiling mount kit and
special rear projection screen are required.
22