Eiki EIP-UJT100 Owner's Manual page 67

Open a web browser on your PC and type the IP address of the projector
(192.168.0.100), IP configuration will be shown on the web page.
Set the IP address and subnet mask and click SAVE to confirm the configuration. Projec-
tor Web Control will show below message for confirmation.
"The projector IP will be changed and the connection to the projector will be lost, do you
want to continue ?
Select "Yes" to confirm the changes, "No" to cancel.
Note:
Make sure the IP address of the projector and PC are in the same network group.
67