Table of Contents
Advertisement
Noise Reduction
Use◄ or ►to adjust the noise of the projected image. This function is suitable for the
elimination of image noise from interleaving SD input. Generally speaking, reducing image
noise will lower the value of high frequency detail and make the image appear more mel-
low. Adjustable value: 0 to 200.
Color Temperature
Use ◄ or ► to adjust the color temperature 3200K, 5400K, 6500K, 9300K or Native of
the projected image.
This refers to the control of color imbalance in the darker areas of the projected image.
It is recommended that you use an external test image with many areas of dark and gray
colors (i.e. an image of 30IRE-window). If you notice minimal amount of red, green or blue
in the gray areas, adjust the offset of the corresponding color accordingly. This function will
shift the entire color spectrum for the whole image and change its brightness.
Input Balance
To adjust Black and White balance.
Black Balance : Adjust R/G/B color offset of image that will control dark areas.
White Balance : Adjust R/G/B color gain of image that will control bright areas.
Aspect Ratio
This function allows user to adjust the picture's Aspect ratio.
When Native input is 16:10, the images as following is the result of picture's aspect ratio
for your preference.
Original
Aspect Ratio of output
screen 5:4
Aspect Ratio of output
Aspect Ratio of output
screen 1.88
screen 2.35:1
Original
Aspect Ratio of output
screen 5:4
Aspect Ratio of output
Aspect Ratio of output
screen 1.88
screen 2.35:1
Aspect Ratio of output
Aspect Ratio of output
screen 4:3
screen 16:10
Aspect Ratio of output
Aspect Ratio of output
screen Letter Box
screen Native
Aspect Ratio of output
Aspect Ratio of output
screen 4:3
screen 16:10
Aspect Ratio of output
Aspect Ratio of output
screen Letter Box
screen Native
40
Aspect Ratio of output
screen 16:9
Aspect Ratio of output
screen Unscaled
Aspect Ratio of output
screen 16:09
Aspect Ratio of output
screen Unscaled
Advertisement
Table of Contents
