Feature And Design - Eiki EIP-UJT100 Owner's Manual

Feature and Design

DLP Projector with High Resolution
The Projector with the high performance
Digital Micro-mirror Device (3-DMDs) in
conjunction with the advanced Liquid Cool-
ing technology to provide the excellent pro-
jecting performance and reliability.
Motor-driven Lens Control
Projection lens can be moved up, down,
right and left with the motor-driven lens
shift function. This function makes it easy to
provide projected image where you want.
Zoom and focus can also be adjusted with a
motor-driven operation.
Complete projection lens options
Six types of motorized projection lens can
be an option for EIP-UJT100, the projection
lenses can cover the throw ratio range from
0.67:1 to 6.96:1 and is suitable to be used
in most of applications.
Quick Lens Change design
The interchangeable lens design allows
the user to easily and quickly change the
suitable lens by rotating the lever.
e-Warping Engine
The projector is equipped with built-in
e-warping engine to support to geometry
correction like keystone, four corners, pin-
cushion/barrel correction and image rota-
tion.
Edge Blending and Blanking Function
Using edge blending function of the pro-
jector can create seamless displays by
overlapping projector images and blending
the edges.
HDBaseT
The projector can support Full HD uncom-
pressed video transmitting with HDBaseT.
Various Lamp Power Options
The advanced dual-lamp optical engine
as well as the single-lamp, dual-lamp, Nor-
mal, Eco (energy-saving) and Custom Pow-
er Level mode offer the convenience for in-
stallation and maintenance. Custom Power
Level option allows you to adjust the lamp
power from 100% to 78.3% to fine-tune the
brightness of projectors.
Shutter Function
The projector is equipped with the shut-
ter that provides complete blackness for
a while the projected image is not needed
with keeping the projector on.
Wired LAN Function
This projector is loaded with a wired LAN
function to control and set-up the projector
remotely via network including general pro-
jector setup, lens control...etc.
High-Density Filter
The projector is designed with a higher
density filter to limit the amount of dust that
can settle on the internal components and
reduce the lamp life or dull the image. It's
easy to vacuum the dust off or replace the
filter when the time comes to clean or re-
place the filter.
Picture-In-Picture
This projector is capable of projecting two
images simultaneously by using Picture In
Picture function. The function offers various
options to select main/sub-menu position
and input source. For details, refer to the
section.