Table of Contents
Advertisement
Rear Projection
Default setting is Off
Select "ON" when you set the projector to rear projection mode. Refer to
justing the Picture Orientation
Ceiling Mode
Default setting is Off
When you have set up the projector for ceiling mode (hung from the ceiling in reverse),
please set it to ON. For more information on different modes of projection, refer to
22 Adjusting the Picture Orientation
Lens Control
Use this function to display Lens Control window, press ◄, ►, ▲ or ▼ to adjust lens
shift, Zoom or Focus. Press Enter button to switch window for Zoom & Focus adjustment
or Lens Shift adjustment.
Dynamic Contrast
When activated this function, the projector will dynamically adjust the picture contrast
from the beginning of the projection until the content has ended.
Gamma
You can choose from five different gamma settings (1.8, 2.0, 2.2, 2.35, 2.5 and Dicom
sim) on the projector to affect picture darker, brighter.. The projector's default gamma val-
ue is at 2.2.
Every setting has precisely defined phases to display all primary colors (red, green, blue)
and secondary colors (yellow, cyan, magenta) in millions of pixels. Changing any number
in the setting will change the resulting color and rearrange the color "triangle".
47
Page 22 Ad-
Page
Advertisement
Table of Contents
