Signal Format; H/V Refresh Rate; Lamp 1 Run Time; Lamp 2 Run Time - Eiki EIP-UJT100 Owner's Manual

Hide thumbs Also See for EIP-UJT100:

Table of Contents

Signal Format

Displays the format of the current input signal.

Displays the horizontal and vertical refresh rates for the current image.

Display the lamp 1 usage time.

Display the lamp 2 usage time.

Use this function to reset the hours for lamp1 or lamp2 to zero.

Note:

After replacing the lamp, remember to reset the lamp hours to ensure the accuracy of lamp hours dis-

played in the OSD Menu.

Displays the projector's total operating hours.

This function displays only blue color to facilitate the process of image inspection for a

service personnel.

Restore the configurations in the OSD Menu back to the factory default.

Note that this function will not apply to items including no signal, network, Projector

control, startup Logo, language, High Altitude mode and lamp hours.

Note:

When Factory Reset is executed, all source memories created by the projector will be erased.

Table of Contents