6.10.2
Removing the USB cable
When removing the mounted cable clamp and USB cable, refer to the following procedure.
(Cable clamp used in this example: RSG-130-V0, KITAGAWA INDUSTRIES CO.,LTD.)
Step 1.
Remove the cable clamp band
Draw out the band while pushing up the tab of the cable clamp with a screwdriver or other tools.
Step 2.
Remove the cable clamp while holding its both sides (Arrow A in the figure). Removing the USB cable
6 - 38
6.10 Installing and Removing the USB cable
Band
A
POINT
POINT
POINT
The USB cable can be removed from the unit with the cable clamp. Remove the cable with
holding both sides of the cable clamp (Arrow A in the figure).
Tab
Driver
A
A
A