Mitsubishi Electric GOT2000 Series User Manual page 89

■6. Part names and settings OF GT27
No.
1) Display section
2) Touch panel
3) USB interface (Host/front)
4) USB interface (Device/front)
5) POWER LED
6) Human sensor
7) Unit installation fitting
8) Reset switch
9) S.MODE switch
10) SD card access LED
11) SD card interface
12) SD card cover
13) Battery
14) Side interface
15) USB interface (Host/back)
16) Cable clamp mounting hole
Terminating resistor setting switch
17)
(inside the cover)
18) Auxiliary extension interface
19) Extension interface
20) Vertical installation arrow mark
21) Power terminal
22) Ethernet interface
23) RS-232 interface
24) RS-422/485 interface
25) USB interface (Device/back)
Name
Displays the utility and the user-created screen.
For operating the touch switches in the utility and the user-created screen
For connecting a USB mouse and a USB keyboard, transferring data, and storing
data (Connector shape; TYPE-A)
Applicable models : GT2715-XTBA/D, GT2712-STBA/D, GT2710-STBA/D,
GT2710-VTBA/D, GT2708-STBA/D, GT2708-VTBA/D, GT2705-VTBD, GT2512-
STBA/D, GT2510-VTBA/D, GT2508-VTBA/D
For connecting a personal computer (Connector shape: Mini-B)
Applicable models : GT2715-XTBA/D, GT2712-STBA/D, GT2710-STBA/D,
GT2710-VTBA/D, GT2708-STBA/D, GT2708-VTBA/D, GT2705-VTBD, GT2512-
STBA/D, GT2510-VTBA/D, GT2508-VTBA/D
Lit in blue
Lit in orange
Blinks in orange and blue: Backlight failure
Not lit
Detects human movement. (GT2715,GT2712 only)
Mounting fixtures for fixing the GOT to the control panel
Hardware reset switch
Used for OS installation at the GOT startup
ON: SD card installed
Blink: SD card accessed
OFF: SD card not installed or SD card installed but removal possible
For installing an SD card
Has the function to switch the access to the SD card between enabled and disabled
states.
When the cover is opened: Access prohibited
When the cover is closed: Access allowed
Space for housing the battery
For installing a communication unit
For connecting a USB mouse and a USB keyboard, transferring data, and storing
data (Connector shape; TYPE-A)
Cable clamp mounting hole as a precaution against a disconnection of the USB
cable (Recommended product: RSG-130-V0 of KITAGAWA INDUSTRIES
CO.,LTD.)
Switches the terminating resistor for the RS-422/485 communication port between
used and unused states (initial setting (unused))
For installing an option unit
Applicable models : GT2715-XTBA/D, GT2712-STBA/D, GT2710-STBA/D,
GT2710-VTBA/D, GT2708-STBA/D, GT2708-VTBA/D
For installing a communication unit or an option unit
For the vertical installation, install the GOT so that the arrow points upward.
Power input terminal, LG terminal (except GT2705-V), FG terminal
For communicating with a controller or connecting a personal computer (Connector
shape: RJ-45 (modular jack))
For communication with a controller (Connector shape: D-sub 9-pin (male))
For communication with a controller (Connector shape: D-sub 9-pin (female))
For connecting a personal computer (Connector shape: Mini-B)
Applicable models : GT2712-STWA/D, GT2710-VTWA/D, GT2510-VTWA/D,
GT2508-VTWA/D
Description
: Power is properly supplied.
: Screen saving
: Power is not supplied.
4.1 GT27, GT25
4
4 - 5