Mitsubishi Electric GOT2000 Series User Manual page 93

■5. GT2103-PMBLS
■6. Part names and settings
No.
1) Display section
2) Touch panel
3) Ethernet interface
4) RS-232 interface (Rear face)
5) RS-232 interface (Side face)
6) RS-422/485 interface
7) RS-422 interface
8) Power supply terminal
9) USB interface (Device)
10) Terminating resistor setting switch
11) Installation fitting
12) SD card interface
13) SD card access LED
14) Battery
SD card unit connector (inside the
15)
cover)
1)2)
11)
Name
Displays the utility and the user-created screen
For operating the touch switches in the utility and the user-created screen
For communicating with a controller or connecting a personal computer
(Connector shape: RJ-45 (Modular jack))
For communicating with a controller or connecting a personal computer (FA
transparent function)
With a 9-pin connector terminal block or 6-pin MINI-DIN connector
For connecting multiple GOTs, a barcode reader, an RFID, or a serial printer
For communicating with a controller or connecting a personal computer (Female
MINI-DIN 6-pin)
For connecting multiple GOTs, a barcode reader, an RFID, or a serial printer
For communicating with a controller (9-pin or 5-pin connector terminal block)
For communicating with a controller (9-pin connector terminal block)
Power supply input terminal, FG terminal
For transferring data and storing data (Connector shape: Mini-B)
Switches the terminating resistor for the RS-422/485 communication port among
330 Ω, OPEN, and 110 Ω (Initial setting (330 Ω))
For fixing the GOT to the control panel
For SD card installed
ON: SD card accessed
OFF: SD card not installed or SD card installed but removal possible
Space for housing the battery
For mounting the SD card unit
9)
7)
Description
4 - 9
4.3 GT21
4