Mitsubishi Electric GOT2000 Series User Manual page 124

The following table lists the distance required between the GOT and the other devices.
The dimensions within the parentheses apply when no equipment generating radiated noise (such as a contactor) or
heat is installed near the GOT.
Item
A
B
When the SD card is
used
C
When the SD card is not
used
D
*1
E
*1
6 - 10
6.3 Installation Position
When an RS-232 cable or personal computer connection cable is connected to the rear face of GT2104-RTBD, GT2103-PMBDS,
or GT2103-PMBDS2, a distance of 80 mm (3.15 inches) or more is required.
When a user-created RS-232 cable is connected to the connector terminal block at the rear face of GT2104-RTBD, a distance of
20 mm (0.79 inch) or more is required.
GT21
GT2104-R, GT2103-P
50 (1.97) or more [20 (0.79) or more]
50 (1.97) or more [20 (0.79) or more]
50 (1.97) or more
50 (1.97) or more [20 (0.79) or more]
50 (1.97) or more
80 (3.15) or more [20 (0.79) or more]
Unit: mm (inch)