Mitsubishi Electric GOT2000 Series User Manual page 81

■2. GT23 Input power supply 24 V DC
Item
Power supply voltage
Under the
maximum load
Power
Main unit
consumption
Main unit
(Backlight OFF)
Inrush current
Permissible instantaneous power
failure time
Noise immunity
Withstand voltage
Insulation resistance
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
(Terminal block terminal screw)
GT2310-VTBD
16 W or less
13 W
7 W
40 A or less (2 ms, ambient temperature: 25 °C, under the maximum load)
Noise voltage: 500 Vp-p, noise width: 1 μs, measured by a noise simulator with noise frequency
350 V AC for 1 minute across power terminals and earth
500 V DC across power terminals and earth, 10 MΩ or more by an insulation resistance tester
Solderless terminal for M3 screw RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A
3.3 Specifications of Power Supply Section
Specifications
24 V DC (+25%, -20%)
10 ms or less
ranging from 25 Hz to 60 Hz.
0.75 mm2 to 2 mm2
0.5 N·m to 0.8 N·m
GT2308-VTBD
11 W or less
8 W
6 W
3 - 33
3