Gt21 - Mitsubishi Electric GOT2000 Series User Manual

3.3.4

GT21

■1. GT21 Input power supply 24 V DC/5 V DC
Item
Power supply voltage
Under the
Power
maximum load
consumption
Backlight OFF
Inrush current
Permissible instantaneous power
failure time
Noise immunity
Withstand voltage
Insulation resistance
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
(Terminal block terminal screw)
3 - 34
3.3 Specifications of Power Supply Section
GT2104-RTBD GT2103-PMBD
4.4 W or less 2.6 W or less
2.9 W 2.0 W
18 A or less (2 ms,
ambient
30 A or less (1 ms, ambient temperature: 25 °C, under the
temperature: 25
maximum load)
°C, under the
maximum load)
Noise voltage: 1000 Vp-p, noise width: 1 μs, measured by a noise simulator with noise frequency
500 V AC for 1 minute across power supply terminals and earth
500 V DC across power supply terminals and earth, 10 MΩ or more by an
insulation resistance tester
Single wiring: Single wire 0.14 to 1.5 mm
Stranded wire 0.14 to 1.0 mm
Rod terminal with an insulation sleeve 0.25 to 0.5 mm
Double wiring: Single wire 0.14 to 0.5 mm
Stranded wire 0.14 to 0.2 mm
AI 0.25-6BU (AWG24), AI 0.34-6TQ (AWG22), AI 0.5-6WH (AWG20) (manufactured by PHOENIX
Swage: CRIMPFOXZA3 (manufactured by PHOENIX CONTACT)
Specifications
GT2103-PMBDS
24 V DC (+10%, -15%)
1.9 W or less
1.3 W
5 ms or less
ranging from 30 Hz to 100 Hz.
2
(AWG26 to AWG16)
2
(AWG26 to AWG24)
CONTACT)
0.22 to 0.25 N·m
GT2103-PMBDS2 GT2103-PMBLS
5 V DC (+5%, -
5%)
Power from the
sequencer
2.2 W or less 1.1 W or less
1.6 W
2
(AWG26 to AWG16)
2
(AWG24 to AWG20)
2
(AWG26 to AWG20)
0.7 W
-
-
-
-