Mitsubishi Electric GOT2000 Series User Manual page 133

Step 4.
Tighten the screws within the specified torque range (0.36 N·m to 0.48 N·m).
Step 5.
To mount another extension unit, repeat Step 2 to Step 3.
When you do not mount another extension unit, cover the screws with the accessory stickers to avoid static
electricity.
Keep the connector cover and the stickers attached.
POINT POINT POINT
(1) Mounting position of the communication unit that occupies two extension interfaces
The following lists the communication units that occupy two extension interfaces. These units
must be mounted to the GOT directly.
These communication unit cannot be mounted on other communication units.
When a video/RGB unit or a multimedia unit is mounted to the GOT, mount a communication
unit on the video/RGB unit or the multimedia unit.
• Bus connection unit (GT15-QBUS2, GT15-ABUS2, GT15-75QBUS2L, and GT15-
75ABUS2L only)
• MELSECNET/H communication unit
• CC-Link IE Controller Network communication unit
• CC-Link IE Field Network communication unit
• CC-Link communication unit (GT15-J61BT13)
(2) Mounting GT15-75QBUSL, GT15-75QBUS2L, GT15-75ABUSL, and GT15-75ABUS2L
These units cannot be mounted on a video/RGB unit or a multimedia unit.
When connecting these units by the bus connection, use GT15-QBUS, GT15-QBUS2, GT15-
ABUS, or GT15-ABUS2.
Accessory
sticker
Connector
cover
Sticker
6.6 Installing and Removing the Extension Unit
6
6 - 19