Mitsubishi Electric GOT2000 Series User Manual page 122

■2. For GT23
Depending on the units and cables used for the GOT, the distance more than the described dimensions may be
required.
Install the GOT with consideration of the connector dimensions and the cable bend radius.
For the cable pull-out distance from the bottom of the GOT, refer to the following.
➠
For the vertical installation, install the GOT so that the vertical installation arrow printed on the GOT rear face points
upward.
➠
Item
A
B
When the SD card is
used
C
When the SD card is not
used
D
*1
E
*1
6 - 8
6.3 Installation Position
11.1 External Dimension Diagrams
4.2 GT23
B
C
A
Horizontal
D
B
C
Vertical
Horizontal: 50(1.97) or more [20(0.79) or
Vertical: 80(3.15) or more [20(0.79) or more]
When opening or closing the battery cover: 72(2.83) or more
D E
Panel thickness: 1.6 mm to 4 mm(0.06 to 0.16inch)
E
A
Panel thickness: 1.6 mm to 4 mm(0.06 to 0.16inch)
GT2310
48(1.89) or more
[18(0.71) or more]
Horizontal: 78(3.07) or more [18(0.71) or more]
Vertical: 50(1.97) or more [20(0.79) or more]
more]
Horizontal: 50(1.97) or more [20(0.79) or more]
Vertical: 80(3.15) or more [20(0.79) or more]
50(1.97) or more
[20(0.79) or more]
100(3.94) or more
[20(0.79) or more]
GT2308
Horizontal: 50(1.97) or more
Vertical: 80(3.15) or more [50(1.97) or more]
Unit: mm (inch)