Mitsubishi Electric GOT2000 Series User Manual page 110

■9. Video/RGB connection
(1) Video input cable
Step 1.
Strip off the sheath at both ends of the cable as shown in the figure below to expose outer braided shield
for grounding.
The braided shield sections are used for grounding with a cable clamp.
➠
GOT side
230 or less
(9.06)
(2) RGB input cable
Step 1.
Wrap the cable shielding material around the cable, and pull out the braided cables for grounding from the
cable shielding material with the length as shown in the figure below.
Step 2.
Install a ferrite core to the cable in the positions as shown in the figure below.
GT2715
GOT side
130 or less
(5.12)
GT2712,GT2710,GT2708
GOT side
130 or less
(5.12)
(3) RGB output cable
Step 1.
Wrap the cable shielding material around the cable, and pull out the braided cables for grounding from the
cable shielding material with the length as shown in the figure below.
Step 2.
Install a ferrite core to the cable in the positions as shown in the figure below.
GOT side
200 or less
(7.87)
5 - 16
5.2 EMC Directive Requirements
5.2.6 Grounding a cable
40
(1.57)
Ferrite core
(ZCAT3035-1330)
Cable shielding material
Grounding braided wire
(50 (1.97))
Ferrite core
(ZCAT3035-1330)
Cable shielding material
40
or less
Grounding braided wire
(1.57)
(50 (1.97))
Ferrite core
(ZCAT3035-1330)
Cable shielding material
Grounding braided wire (50 (1.97))
20 or less
(0.79)
Video camera/
vision sensor side
40 400 or less
(1.57) (15.75)
40
or
less
110 or less
(4.33)
(1.57)
170 or less
(6.69)
20 or less 200 or less
(0.79) (7.87)
Unit: mm (inch)
Vision sensor/
personal computer side
Unit: mm (inch)
Vision sensor/
personal computer side
Unit: mm (inch)
External display side
Unit: mm (inch)