Connecting A Usb Device; Connecting Multiple Usb Devices Using The Usb Hub Function - Mitsubishi Electric MDT5525 User Manual

P-8

Connecting a USB device

Connecting multiple USB devices using the USB hub function

The USB hub of this monitor is equipped with two switchable upstream ports. One is for connecting an external computer, and the
other is for connecting an OPS-compliant computer internally. Only the selected upstream port is connected to the USB hub. Use
the OSD screen function to select the appropriate upstream port. See pages 45 and 57.
1. [When using an external computer]
Connect the USB port (Standard A) on the computer and the USB upstream port (Standard B) on the monitor using a USB cable
(commercially available).
[When using an OPS-compliant computer]
Install an OPS-compliant computer (connected internally).
2. Connect a USB device to the downstream port of this monitor.
When using an external
computer
USB
NOTE:
• The USB hub function cannot control the monitor.
• Up to 5 hubs can be cascaded in the hub function of this monitor. Carry out operation check in advance even if you connect a
device pursuant to the USB standards.
Internal structure of the monitor's USB function
Switch
Upstream port
Internal hub
Downstream port
When using an OPS-compliant
computer
USB devices
(mouse, touch panel, etc.)
English-29
Carry out as necessary