Low-Voltage Battery Detection And Battery Replacement - Mitsubishi Electric GOT2000 Series User Manual

9.4

Low-voltage Battery Detection and Battery Replacement

■1. Low-voltage battery detection and battery replacement
The battery is used to hold the SRAM data, clock data, and backup data of the system status log data.
The periodical replacement of the battery is recommended.
For the battery replacement procedure, refer to the following.
➠
You can check if the battery has a low voltage by using the utility and the system alarm.
For details of the battery status display by using the utility, refer to the following.
➠
The system alarm enables the GOT to display the message notifying the low-voltage battery when the battery voltage
is low.
To display the message by the system alarm, set [Battery alarm display] to ON.
➠
For the details of the system alarm, refer to the following.
➠
9 - 6
9.4 Low-voltage Battery Detection and Battery Replacement
6.7 Installing and Removing the Battery
GOT2000 Series User's Manual (Utility)
GOT2000 Series User's Manual (Utility)
500 Warning! Built-in battery voltage is low.
GT Designer3 (GOT2000) Help
POINT POINT POINT
Battery replacement timing
When a low-voltage battery is detected, replace the battery immediately.
The GOT retains the data for 14 days after the low-voltage battery detection. However, after the
period, the GOT cannot retain the data.
System alarm