Removing The Right Side Cover - Husqvarna FS 450 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.30
62
S02309-10

Removing the right side cover

V01447-10
Main work
–
Remove all the screws on the silencer cap.
–
1
Take off silencer cap
–
Pull glass fiber yarn filling
–
Pull glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount new glass fiber yarn filling
–
Position new glass fiber yarn filling
–
Insert O-ring and silencer cap into outer tube
–
Mount all screws on the silencer cap and tighten.
Guideline
Screws on main
silencer
Finishing work
–
Install the main silencer. (
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 57)
Main work
–
Detach side cover in area
and take off toward the rear.
2
and O-ring .
3
out of the silencer cap.
4
from the inner tube.
4
on the inner tube.
3
in the silencer cap.
5
.
M5 7 Nm (5.2 lbf ft)
p. 61)
p. 58)
A
, pull off sideways in area
B