Table of Contents
Advertisement
11
SERVICE WORK ON THE CHASSIS
11.31
Removing the right side cover
11.32
Installing the right side cover
Preparatory work
–
Remove the right side cover. (
–
Remove the main silencer. (
Main work
–
Remove all screws from the main silencer.
–
Take off silencer cap
–
Take off outer tube
–
Pull the glass fiber yarn filling
–
Clean the parts that are to be reinstalled.
–
Mount the new glass fiber yarn filling
–
Slide O-ring
–
Insert O-ring
–
Mount and tighten all screws.
C00494-10
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Remove screw
–
Pull off the side cover in area
M00264-10
–
Position the side cover and engage in area
–
Mount and tighten screw
Guideline
Remaining screws, chassis
M00264-10
p. 46)
p. 45)
and O-ring
and O-ring
.
from inner tube
and outer tube
over the glass fiber yarn filling.
and silencer cap
into the outer tube.
p. 45)
p. 46)
.
sideways and remove it toward the rear.
.
.
.
on the inner tube.
.
M6
10 Nm (7.4 lbf ft)
46
Advertisement
Table of Contents
