Default Dcb Values - Dell PowerConnect 8024 User Configuration Manual

Table 29-1. Data Center Features (Continued)
Feature
DCBx
FIP Snooping
ETS

Default DCB Values

Table 29-2 lists the default values for the DCB features that this chapter
describes.
Table 29-2. Default Port-Based Traffic Control Values
Feature
PFC
DCBx version
FIP snooping
FC map value
FIP snooping port mode
810
Configuring Data Center Bridging Features
Description
Allows DCB devices to exchange configuration information, using
type-length-value (TLV) information elements over LLDP, with
directly connected peers.
Inspects and monitors FIP frames and applies policies based upon
the L2 header information in those frames
Supports the ETS configuration and Application Priority TLVs,
which are accepted from auto-upstream devices and propagated to
auto-downstream devices. In support of FIP snooping, the 8024
switch only transports the ETS TLVs and does not configure itself
with received ETS information. The PC8132/PC8164 switches
support the automatic configuration of the switch with received
ETS parameters.
Default
Disabled, no priority classifications are
configured.
Auto detect
Disabled globally and on all VLANs
0x0efc00
Host facing (not FCF facing)