Configuring Stub Areas And Nssas - Dell PowerConnect 8024 User Configuration Manual

Command
show ipv6 ospf interface
interface-type interface-
[
number
]
show ipv6 ospf interface
interface-type
stats
interface-number

Configuring Stub Areas and NSSAs

Beginning in Privileged EXEC mode, use the following commands to
configure OSPFv3 stub areas and NSSAs.
Command
configure
ipv6 router ospf
area-id
area stub
area-id
area stub no-
summary
area-id
area default-cost
cost
Purpose
View summary information for all OSPFv3 interfaces
configured on the switch or for the specified routing
interface.
View per-interface OSPFv3 statistics.
Purpose
Enter global configuration mode.
Enter OSPFv3 configuration mode.
Create a stub area for the specified area ID.
Prevent Summary LSAs from being advertised into the
stub area.
Configure the metric value (default cost) for the type 3
summary LSA sent into the stub area. Range:
1–16777215)
Configuring OSPF and OSPFv3
1003