Dell PowerConnect 8024 User Configuration Manual page 387

Command
rcvr-index
sflow polling
if_type if_number poll-
interval
rcvr-index
sflow
if_type
sampling
if_number sampling-rate
size
[ ]
interface
interface
rcvr-index
sflow polling
poll-interval
rcvr-index
sflow sampling
sampling-rate size
[ ]
CTRL + Z
Purpose
Enable a new sFlow poller instance on an interface range.
rcvr-index
• — The sFlow Receiver associated with the
poller (Range: 1–8).
if_type if_number
•
interface type can be Tengigabitethernet (te), for
example te1/0/3-5 enables polling on ports 3, 4, and 5.
poll-interval
• — The sFlow instance polling interval. A
n
value of means once in
generated. (Range: 0–86400).
Enable a new sflow sampler instance for the specified
interface range.
rcvr-index
• — The sFlow Receiver for this sFlow sampler
to which flow samples are to be sent.
if_type if_number
•
interface type can be Tengigabitethernet (te), for
example te1/0/3-5 enables polling on ports 3, 4, and 5.
sampling-rate
• — The statistical sampling rate for packet
sampling from this source. A sampling rate of 1 counts all
packets. A value of
packets, 1 packet will be sampled. (Range: 1024 - 65536).
size
• — The maximum number of bytes that should be
copied from the sampler packet (Range: 20 - 256 bytes).
Enter interface configuration mode for the specified
interface
interface. The
and number, for example tengigabitethernet 1/0/3 or
te1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
tengigabitethernet 1/0/8-12 configures interfaces 8, 9, 10,
11, and 12.
Enable a new sFlow poller instance for the interface.
Enable a new sflow sampler instance for the interface.
Exit to Privileged Exec mode.
— The list of interfaces to poll. The
n
seconds a counter sample is
— The list of interfaces to sample. The
n
means that out of
variable includes the interface type
Monitoring Switch Traffic
n
incoming
387