Managing Configuration Scripts - Dell PowerConnect 8024 User Configuration Manual

console#reload
Are you sure you want to continue? (y/n)y
Reloading all switches...

Managing Configuration Scripts

This example shows how to create a configuration script that adds three
hostname-to-IP address mappings to the host table.
To configure the switch:
1 Open a text editor on an administrative computer and type the commands
as if you were entering them by using the CLI.
Figure 14-10. Create Config Script
2 Save the file with an *.scr extension and copy it to the appropriate
directory on your TFTP server.
3 Download the file from the TFTP server to the switch.
console#copy tftp://10.27.65.103/labhost.scr
script labhost.scr
Mode........................................... TFTP
332
Managing Images and Files