Dell PowerConnect 8024 User Configuration Manual page 1138

Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

console(config-policy-map)#class development_dept
console(config-policy-classmap)#assign-queue 4
console(config-policy-classmap)#exit
console(config-policy-map)#exit
4 Attach the defined policy to 10-Gigabit Ethernet interfaces 1/0/1 through
1/0/4 in the inbound direction
console(config)#interface
console(config-if-
console(config-if-
console(config)#interface
console(config-if-
console(config-if-
console(config)#interface
console(config-if-
console(config-if-
console(config)#interface
console(config-if-
console(config-if-
5 Set the CoS queue configuration for the (presumed) egress 10-Gigabit
Ethernet interface 1/0/1 such that each of queues 1, 2, 3 and 4 get a
minimum guaranteed bandwidth of 25%. All queues for this interface use
weighted round robin scheduling by default. The DiffServ inbound policy
designates that these queues are to be used for the departmental traffic
through the assign-queue attribute. It is presumed that the switch will
forward this traffic to 10-Gigabit Ethernet interface 1/0/1 based on a
normal destination address lookup for internet traffic.
console(config)#interface
console(config-if-
console(config-if-
console(config)#exit
1138
Configuring Differentiated Services
ten
gigabitethernet 1/0/1
Te
1/0/1)#service-policy in internet_access
Te
1/0/1)#exit
ten
gigabitethernet 1/0/2
Te
1/0/2)#service-policy in internet_access
Te
1/0/2)#exit
ten
gigabitethernet 1/0/3
Te
1/0/3)#service-policy in internet_access
Te
1/0/3)#exit
ten
gigabitethernet 1/0/4
Te
1/0/4)#service-policy in internet_access
Te
1/0/4)#exit
ten
gigabitethernet 1/0/5
Te
1/0/5)#cos-queue min-bandwidth 0 25 25 25 25 0 0
Te
1/0/5)#exit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents