Diffserv Policy Attributes Configuration - Dell PowerConnect 8024 User Configuration Manual

DiffServ Policy Attributes Configuration

Beginning in Privilege Exec mode, use the following commands to configure
policy attributes and view related information.
CLI Command
configure
policy-map-name
policy-map
class-name
class
queue-id
assign-queue
datarate
police-simple {
burstsize
conform-action
{drop | set-cos-transmit
cos
set-prectransmit
dscpval
transmit | transmit}
[violateaction {drop | set-cos-
cos
transmit | set-prec-
cos
transmit | set-dscp-
dscpval
transmit | transmit}]}
Description
Enter global configuration mode.
Enter Policy Map Configuration mode for the
specified policy.
Create an instance of a class definition within the
specified policy for the purpose of defining
treatment of the traffic class through subsequent
policy attribute statements. Also enters Policy-
Class-Map Configuration mode for the policy-class-
map instance.
Modify the queue ID (range: 0–6) to which the
associated traffic stream is assigned.
Establish the traffic policing style for the specified
class. The simple form of the police command uses
cos
| a single data rate and burst size, resulting in two
| set-dscp- outcomes: conform and nonconform.
datarate
•
(Range: 1–4294967295)
burstsize
•
• conform action — Indicates what happens when
the packet is conforming to the policing rule: it
could be dropped, it could have its COS modified,
it could have its IP precedence modified, or it
could have its DSCP modified. The same actions
are available for packets that do not conform to the
policing rule.
cos
•
dscpval
•
from this list, af11, af12, af13, af21, af22, af23,
af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2,
cs3, cs4, cs5, cs6, cs7, ef)
— Data rate in kilobits per second (kbps).
— Burst size in Kbps (Range: 1–128)
— Class of Service value. (Range: 0–7)
— DSCP value. (Range: 0–63 or a keyword
Configuring Differentiated Services
1133