Dell PowerConnect 8024 User Configuration Manual page 896

Hide thumbs Also See for PowerConnect 8024:

Table of Contents

Table 33-1. IP Routing Features (Continued)

ICMP Router Discovery

Protocol (IRDP)

Routing table entries

Route preferences

Configuring IP Routing

Hosts can use IRDP to identify operational routers

on the subnet. Routers periodically advertise their

IP addresses. Hosts listen for these advertisements

and discover the IP addresses of neighboring

You can configure the following route types in the

routing table:

• Default: The default route is the route the switch

will use to send a packet if the routing table does

not contain a longer matching prefix for the

packet's destination.

• Static: A static route is a route that you manually

add to the routing table.

• Static Reject: Packets that match a reject route

are discarded instead of forwarded. The router

may send an ICMP Destination Unreachable

The common routing table collects static, local,

and dynamic (routing protocol) routes. When

there is more than one route to the same

destination prefix, the routing table selects the

route with the best (lowest) route preference.

Show Quick Links

Table of Contents