Dell PowerConnect 8024 User Configuration Manual page 330

Figure 14-9. Image Path
3 View information about the current image.
console#show version
Image Descriptions
image1 :default image
image2 :
Images currently available on Flash
------- ------------ ------------ --------------- --------------
unit image1
------- ------------ ------------ --------------- --------------
1 4.1.0.7
4 Download the image to the switch. After you execute the copy command,
you must verify that you want to start the download.
Use either the active or backup keyword to have the image to replace the
specified image type (which takes effect only after a reboot). In the
following example, the active image is replaced.
console#copy
tftp://10.27.65.103/images/dell_0308.stk active
Mode........................................... TFTP
Set TFTP Server IP............................. 10.27.65.103
TFTP Path...................................... images/
TFTP Filename.................................. dell_0308.stk
330
Managing Images and Files
image2 current-active next-active
5.0.0.8 image1 image1