Dell PowerConnect 8024 User Configuration Manual page 450

5. Configure the Employee Captive Portal.
console(config-CP)#configuration 4
console(config-CP 4)#name Employee
console(config-CP 4)#verification radius
console(config-CP 4)#group 3
console(config-CP 4)#interface te1/0/18
...
console(config-CP 4)#interface te1/0/22
console(config-CP 4)#exit
6. Use the web interface to customize the Captive Portal pages that are
presented to users when they attempt to connect to the network.
NOTE:
interface. For information about customizing the Captive Portal pages, see
"Customizing a Captive Portal" on page 423.
7. Add the Conference users to the local database.
console(config-CP)#user 1 name EaglesNest1
console(config-CP)#user 1 password
Enter password (8 to 64 characters): *********
Re-enter password: *********
console(config-CP)#user 1 group 2
Continue entering username and password combinations to populate the
local database.
8. Add the User-Name, User-Password, Session-Timeout, and Dell-Captive-
Portal-Groups attributes for each employee to the database on the
RADIUS server.
9. Globally enable the Captive Portal.
console(config-CP)#enable
450
Configuring Captive Portal
Captive Portal page customization is supported only through the Web