6 Parameter Settings and Functions
6.2
Control Output
6.2.1
Control Output Mode [PAR3 → O-FT]
Setting
Group
PAR3
6.2.1.1
Heating Control [PAR3 → O-FT → HEAT]
Heating control mode: the output will be provided in order to supply power to the load
(heater) if PV (Present Value) falls below SV (Setting Value).
6.2.1.2
Cooling Control [PAR3 → O-FT → COOL]
Cooling control mode: the output will be provided in order to supply power to the load
(cooler) if PV (Present Value) rises above SV (Setting Value).
56
Control output modes for general temperature control include heating, cooling, and
heating and cooling.
Heating control and cooling control are mutually opposing operations with inverse
outputs.
The PID time constant varies based on the controlled objects during PID control.
Parameter
O-FT
Heating/Cooling Model: HEAT / COOL / H-C
Setting Range
Standard Model: HEAT / COOL
© Copyright Reserved Autonics Co., Ltd.
Factory
Unit
Default
-
HEAT
-
H-C