Password Entry Parameter; Parameter Change Reset Parameters - Autonics TK4S User Manual

7 Setting Group Parameter Description
7.8

Password Entry Parameter

PASS
7.9

Parameter Change Reset Parameters

Changed
Parameter
AL-1, AL-2
118
Parameter
Password
Description
Input types
IN-T
Temperature input
UNIT
unit
SV high-limit value
H-SV
SV low-limit value
L-SV
Control output
O-FT
operation mode
Temperature control
C-MD
type
Alarm mode/option
Description
0001 to 9999
Password entry.
(0001: read-only)
SV-N, AL1.L, AL1.H, AL2.L, AL2.H, SV0∼SV3,
DB, H.HYS, H.OST, C.HYS, C.OST, RAMU, RAMD,
R.UNT, L-RG, H-RG, DOT, L-SC, H-SC, D.UNT, IN-B,
L -SV, H -SV, LBA.T, LBA.S, LBA.B, AO-M, FS-L, FS-
H,
With the exception of L-RG, H-RG, DOT, L-SC, H-SC,
and D.UNT, Input type does not affect input units.
When SV>H-SV, SV resets to H-SV.
When SV<L-SV, SV resets to L-SV.
L-MV, H-MV, C-MD, ER.MV, PR.MV, ST.MV
L-MV, H-MV, ER.MV, PR.MV, ST.MV
AL1.L, AL1.H, AL2.L, AL2.H
© Copyright Reserved Autonics Co., Ltd.
Setting Range Unit
-
Reset Parameter
Factory
Default
0001