Additional Features; Monitoring - Autonics TK4S User Manual

6.7

Additional Features

6.7.1

Monitoring

Refer to 5-3-4. MV Monitoring and Manual Control Settings.
6.7.1.1 Control Output MV Monitoring
Monitors and displays the current control output MV.
6.7.1.1.1. Heating MV Monitoring



6.7.1.1.2. Cooling MV Monitoring



6.7.1.2 Heater Current Monitoring [PAR1 → CT-A]
A feature that monitors and displays the current of a heater (load) being controlled by
control output.
Setting
Group
PAR1
© Copyright Reserved Autonics Co., Ltd.
Displays the current heating MV during heating control or heating and cooling control.
Users may manually adjust the MV to control the temperature.
Measurement Range: H 0.0 to H100 (Unit: %)
Capable of displaying MV with a moving decimal point (H99.9 → H100).
Displays the current cooling MV during cooling control or heating and cooling control.
Users may manually adjust the MV to control the temperature.
Measurement Range: C 00 to C100 (Unit: %)
Capable of displaying MV with a moving decimal point (C99.9 → C100).
Parameter
CT-A
A current transformer is used to measure and display the heater's (load)
current.
6 Parameter Settings and Functions
Measurement Range
0.0 to 50.0
Unit
A
97